{"product_id":"mapei-ultrabond-eco-tx-2-16-kg","title":"MAPEI ULTRABOND ECO TX 2 – 16 KG","description":"\u003cp\u003e\u003cstrong\u003eWHERE TO USE\u003cbr\u003e\u003c\/strong\u003eHigh initial grab and long open time adhesive, suitable for bonding textile floor coverings with all types of backing\u003cbr\u003ematerials (jute, polypropylene, Action-Bac , woven, latex, foam, needle felt, etc.) and needle-punches on all kinds of\u003cbr\u003einterior, absorbent substrates, stable in the presence of humidity.\u003cbr\u003eSuitable for:\u003cbr\u003e· normal and intense traffic and in residential and commercial areas (offices, hotels, auditoriums, libraries, restaurants,\u003cbr\u003eairports, etc);\u003cbr\u003e· stresses from chair castors according to EN 12529;\u003cbr\u003e· underfloor heating systems;\u003cbr\u003e· double-stick installations.\u003cbr\u003e\u003cstrong\u003eTECHNICAL CHARACTERISTICS\u003c\/strong\u003e\u003cbr\u003eUltrabond Eco TX2 is an acrylic adhesive in water dispersion, formulated in a ready to use light beige paste.\u003cbr\u003eProduct properties:\u003cbr\u003e· very easy to apply;\u003cbr\u003e· excellent wetting of the covering backing;\u003cbr\u003e· high initial grab;\u003cbr\u003e· long open time: particularly suitable for patterned carpets;\u003cbr\u003e· quick leg development;\u003cbr\u003e· high and tough final strength;\u003cbr\u003e· exposure to chair castors in accordance with EN 12529;\u003cbr\u003e· non-flammable;\u003cbr\u003e· EMICODE EC1 Plus (very low emission);\u003cbr\u003e· Blauer Engel DE-UZ 113.\u003cbr\u003e\u003cstrong\u003eRECOMMENDATIONS\u003cbr\u003e\u003c\/strong\u003e· Install in recommended temperatures, normally between +15°C and +35°C.\u003cbr\u003e· Do not install on substrates not protected from rising damp.\u003cbr\u003e\u003cstrong\u003eAPPLICATION PROCEDURE\u003cbr\u003e Preparing the substrate \u003c\/strong\u003e\u003cbr\u003eSubstrates must be uniformly dry, absorbent, level, sound, mechanically strong, free of dust, loose parts, cracks, paints,\u003cbr\u003ewax, oil, rust, traces of gypsum or other products that can interfere with bonding.\u003cbr\u003eOn non-absorbent substrates, apply a smoothing compound to a minimum thickness of 2 mm.\u003cbr\u003eCommonly, the moisture content must be the one foreseen by the regulations of each country.\u003cbr\u003eIt is essential to make sure there is no rising damp present.\u003cbr\u003eUnbonded screeds laid over lightweight concrete or over insulation layers and screeds laid directly onto earth must be\u003cbr\u003eseparated by a vapour barrier to prevent rising damp.\u003cbr\u003eTo repair cracks in the substrate, consolidate and waterproof screeds, form new fast-drying screeds and level uneven\u003cbr\u003esubstrates, please refer to the relevant technical documentation or contact the MAPEI Technical Services Department.\u003cbr\u003e\u003cstrong\u003eSpreading the adhesive\u003c\/strong\u003e\u003cbr\u003eUltrabond Eco TX2 is ready to use and does not need any preparation. Before using, stir the adhesive in the bucket. Apply\u003cbr\u003ethe adhesive evenly to the substrate with a suitable notched trowel.\u003cbr\u003e\u003cstrong\u003eInstalling the flooring\u003cbr\u003eFollow the manufacturer’s instructions.\u003cbr\u003e\u003c\/strong\u003eBonding (on absorbent substrates).\u003cbr\u003eLeave a waiting time (10-20’) according to the application quantity, climatic conditions, substrate absorbency and type of\u003cbr\u003ecovering. Make sure not to exceed the the open time (20-30’) and to ensure a good transfer to the backing of the covering.\u003cbr\u003eLay the floor covering whilst still wet: the adhesive ridges has to be impressed. Take care to avoid air pockets and carefully\u003cbr\u003erub the floor covering down to ensure good adhesive transfer to the backing. Avoid excessive stress at the seams. After\u003cbr\u003esome minutes installing the floor covering, it is always necessary to carefully roll it down again or to firmly rub it down.\u003cbr\u003eNote: waiting and open time may vary depending on temperature, relative humidity and absorbency of the substrate.\u003cbr\u003eThey will be shorter at higher temperatures and lower humidity, but longer at lower temperatures, higher humidity and\u003cbr\u003ewith low absorbent substrates.\u003cbr\u003e\u003cstrong\u003eCLEANING\u003c\/strong\u003e\u003cbr\u003eWhile still fresh, Ultrabond Eco TX2 may be removed from floor coverings and tools with water. When dry, it can be\u003cbr\u003eremoved by means of alcohol or Pulicol 2000.\u003cbr\u003e\u003cstrong\u003eCONSUMPTION\u003cbr\u003e\u003c\/strong\u003eConsumption varies with uniformity of substrate, the back of the flooring and the type of trowel used.\u003cbr\u003eMAPEI n. 2-3 trowel: approx. 350-450 g\/m²\u003cbr\u003eTKB B1 trowel: approx. 300-350 g\/m²\u003cbr\u003eTKB B2 trowel: approx. 350-450 g\/m²\u003cbr\u003e\u003cstrong\u003ePACKAGING\u003cbr\u003e\u003c\/strong\u003eUltrabond Eco TX2 is available in 16 kg drums.\u003cbr\u003e\u003cstrong\u003eSTORAGE\u003cbr\u003e\u003c\/strong\u003eUnder normal conditions Ultrabond Eco TX2 is stable for at least 12 months in its original sealed packaging. Avoid\u003cbr\u003eprolonged exposure to frost.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MAPEI","offers":[{"title":"Default Title","offer_id":45387243880630,"sku":null,"price":320.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9458\/2198\/files\/MAPEI-1.jpg?v=1787909563","url":"https:\/\/sashardwareuae.com\/products\/mapei-ultrabond-eco-tx-2-16-kg","provider":"Safinat Building Materials","version":"1.0","type":"link"}